Workbench
Starter projects
Ready-made projects for Pico and ESP32. Pick one, fill in a few settings like your Wi-Fi name, and send it to your board. The code is right there if you want to tinker.
← All starter projects
Board output
You edited , so the settings no longer change it.
- Want to change it and run it line by line? Open in IDE takes these files to the IDE, where you can also send your own code and install packages.
- Pico: plug it in normally, without holding BOOTSEL. It shows up as Board in FS mode or Pico.
- ESP32: it shows up as CP2102, USB-SERIAL CH340 or USB JTAG/serial debug unit.
- The board needs MicroPython on it already (flash it first). Files with the same names get replaced. Board not in the list?